Airius Delta-T Fan Control
The Airius DeltaT controls allow for 6 modes of quiet speed control by utilizing an autotransformer to eliminate the hum often associated with TRIAC type controls. Packages available for AC or EC motor options.
EC Version Available NOW
DeltaT control – Dynamic speed control driven by the differential between temperature sensors.
BAS integration – 0-10VDC control input for controlling fan speed across 8 speed steps.
Thermostat control – When the temperature reaches a set-point, the fans energize to a set speed.
Humidistat control– When RH reaches a user defined threshold, the fans energize to a set speed.
Manual control – User control will override any automatic mode with 8 manual speed steps.
24hr timer – Set fans to turn on and off at a set time every day.
Pearlink Wifi Control
Integrate with an existing WiFi network to provide wireless connectivity for monitoring stratification levels and individual or grouped fan control. Each installation will include a floor sensor to be installed 48 in. A.F.F.
Closed loop fan control. Adjust fan speed and monitor actual rpm.
Compatible with EC motors.
One year parts and workmanship.
2.4 Ghz network required
iOS and Android app available for free
Recommended for smaller installations up to ~20 fans
Speed Control, Potentiometer
The control mounts in a standard 2″ x 4″ electrical wall box. Includes faceplate, knob and screws. Do not exceed 1000 ft. of control wire.
Push Button On/Off – Infinitely variable speed settings.
Compatible with EC motors.
One year parts and workmanship.
Part number: POT-1
BACnet MS/TP Fan Control
Individual Airius fan control and status integration over BACnet MS/TP. Up to 63 fans per BACnet MS/TP network. One AiriusBAC24 device required per fan.
On/off, fan speed control and rpm monitoring.
Compatible with EC motors.
Three year parts and workmanship.
Part number: AiriusBAC24
Speed Control, 120V, 1.5 Amp
This quiet step speed control includes circuitry to reduce noise. The control mounts in a standard 2″ x 4″ electrical wall box. Includes faceplate, knob, screws and wire nuts. Total fan amperage should not exceed the speed control amperage rating.
Off – Max – Hi – Medium – Low speed settings.
Compatible with shaded pole or permanent split capacitor motors.
Special circuitry to reduce motor noise.
One year parts and workmanship.
Part number: TRIAC-120-1.5
Speed Control, 120V, 6 Amp
The control mounts in a standard 2″ x 4″ electrical wall box. Includes faceplate, knob, screws and wire nuts. Total fan amperage should not exceed the speed control amperage rating.
Off – Infinitely variable speed settings.
Compatible with shaded pole or permanent split capacitor motors.
Minimum speed set screw to adjust stall point.
One year parts and workmanship.
Part number: TRIAC-120-5
Speed Control, 120V, 15 Amp
The control mounts in a standard 2″ x 4″ electrical wall box. Includes faceplate, knob, screws and wire nuts. Total fan amperage should not exceed the speed control amperage rating.
Off – Infinitely variable speed settings.
Compatible with permanent split capacitor or shaded pole motor
Minimum speed set screw to adjust stall point.
One year parts and workmanship.
Part number: TRIAC-120-15
Speed Control, 230V, 8 Amp
The control mounts in a standard 2″ x 4″ electrical wall box. Includes faceplate, knob, screws and wire nuts. Total fan amperage should not exceed the speed control amperage rating.
Off – Infinitely variable speed settings.
Compatible with shaded pole or permanent split capacitor motors.
Minimum speed set screw to adjust stall point.
One year parts and workmanship.
Part number: TRIAC-230-8
Speed Control, 277V, 5 Amp
The control mounts in a standard 2″ x 4″ electrical wall box. Includes faceplate, knob, screws and wire nuts. Total fan amperage should not exceed the speed control amperage rating.
Off – Infinitely variable speed settings.
Compatible with shaded pole or permanent split capacitor motors.
Minimum speed set screw to adjust stall point.
One year parts and workmanship.
Part number: TRIAC-277-5
Speed Control, 95-250V, SMART TRIAC
Control the speed of all fans on a dedicated circuit. Control input via 4-20mA/2-10vdc, manually through a speed setting dipswitch, or automatically with ceiling and floor temperature sensors.
Speed adjustment via 4-20mA/2-10vdc, fixed speed, or automatically with ceiling and floor temperature sensors
Compatible with permanent split capacitor or shaded pole motors.
Mounts in a standard 4” x 4” x 1.5” electrical job box.
One year parts and workmanship.
Part number: TRIAC-SMART-7.5 or TRIAC-SMART-7.5-AUTO
